Start with what you want to make for Christmas. A few felt-faced coasters suit a small gift, cone trees and wreaths give you a mantel display, and a robin blanket or colourwork jumper makes a longer project. This guide covers the wardrobe, gifts and decorations in Your Crochet Christmas 2024, with page numbers for the original instructions.

I counted 67 named projects and set variations. Shared accessories and construction pieces are listed with their parent project. The printable guide includes a planning tip for each idea, a chart finder and a UK-to-US stitch key.

- Wardrobe (19)
- Homeware (5)
- Gifts and toys (11)
- Tree and mantel (29)
- PetsCrochet picks (3)
1. Wardrobe
Choose accessories if you want one piece to finish between bigger projects. For garments, start with a washed gauge swatch and the source sizing table.
Colourwork scarf

A long charted scarf with asymmetric blocks and fringe. Swatch the colourwork and check the first chart repeat before committing to the full length.
Issue pp. 12 · chart p. 123
Striped brim hat

Colour blocks at the crown and a ribbed turn-up. Choose the size from the circumference chart and check brim stretch.
Issue pp. 12–13
Mismatched mittens

Mirrored mitts with contrasting cuffs and different colour placement. Write out the two colour orders and check the thumb openings before edging.
Issue pp. 13–14
Lightning socks

Striped socks with a lightning motif and a separately worked heel. Choose the fit first and mark the heel opening before continuing the foot.
Issue pp. 14–15 · chart p. 121
Geometric earrings

A pair of crochet square and circle motifs for jewellery. Check that each motif lies flat before attaching the jewellery findings.
Issue pp. 15
Party cardigan

An asymmetric cardigan with gathered sleeves, bands and button closure. Swatch the stitch pattern and mark which panel uses each colour sequence.
Issue pp. 17–20
Rainbow hoodie upcycle

Colourful crochet worked onto a ready-made hoodie. Test the attachment on scrap fabric before marking or punching the garment.
Issue pp. 21–22
Penguin hat

A dark hat with light eye patches, beak and tassel. Centre the eye patches and beak before sewing them to the fitted hat.
Issue pp. 23–25
Penguin mittens
See the shared project photo
Matching character mittens with contrasting face pieces. Pin the faces so the two mittens look balanced side by side.
Issue pp. 23–25
Peacock jumper

An oversized sweater assembled from colourful square and partial motifs. Block a test motif and lay out the square and half-square placements before joining.
Issue pp. 26–30
Jumbo striped wrap

A broad wrap with bold stripes and pompom trim. Test how the striped fabric drapes and plan the trim after measuring the finished edge.
Issue pp. 31–32
Tunisian colourwork jumper

A Fair Isle-inspired garment made from Tunisian colourwork panels. Choose the chart for the size and compare the washed swatch to the garment gauge.
Issue pp. 33–36 · chart p. 122
Grid hat

A textured winter hat with ribbing and a grid motif. Check the ribbing circumference before starting the grid section.
Issue pp. 38–39
Grid cowl
See the shared project photo
A matching neck warmer in the grid stitch. Swatch the grid and check the opening before joining.
Issue pp. 38–39
Striped poncho

A two-panel poncho with stripes and short sleeves. Match stripe placement across both panels before sewing the shoulders.
Issue pp. 42–43
Tiny Wave baby jumper

A striped jumper built from two T-shaped pieces. Choose the size from the source measurements and match the sleeve edges before assembly.
Issue pp. 44–46 · chart p. 121
Christmas tree sweater upcycle

A ready-made sweater decorated with a pieced tree and small baubles. Arrange all tree pieces on the flat sweater and baste before sewing.
Issue pp. 47–48
Granny square hoodie

A hooded garment assembled from three granny square colourways. Block one square in each colourway and map the hood and body joins.
Issue pp. 49–51 · chart p. 123
Ruffled fingerless mitts

Long fingerless mitts with a ruffle below the thumb. Check the thumb position before adding the ruffle.
Issue pp. 52–53
2. Homeware
Compare the repeating robin and tree motifs with the more textured rug and basket cover. Measure the surface, basket or cushion before buying yarn.
Robin motif blanket

A throw combining robin squares and striped filler squares. Block the two motifs to matching dimensions and plan the grid before joining.
Issue pp. 40–41
Nordic tree blanket

A two-colour tree blanket with an all-over graphic repeat. Work one chart repeat and check that the trees read from the intended side.
Issue pp. 54, 60 · chart p. 124
Pompom basket cover

A two-tone cover for an existing basket with a textured edge. Measure the actual basket at its widest point and test the cover before trimming.
Issue pp. 56, 62
Mosaic tree cushion

A tree-patterned panel sewn to a cushion cover. Block the panel to the cover dimensions before sewing the border in place.
Issue pp. 57, 62–63 · chart p. 124
Star-shaped rug

A neutral rug with bobbles radiating from the centre. Lay the work flat at the end of a repeat and adjust tension if the points pull.
Issue pp. 58–59, 63–64
3. Gifts and toys
The coaster set offers four variations on one base. The bear, peas and stockings take more assembly, so plan the finishing before making multiples.
Santa snuggle sack

A large red novelty sack with Santa legs and boots. Check the source dimensions and the joins around the added boots.
Issue pp. 66–68
Matching Santa hat
See the shared project photo
A matching festive hat included with the sack. Measure the intended head size and check the brim before adding the tip.
Issue pp. 66–68
Reindeer antler headband

A human headband with branched crochet antlers. Dry-fit the branches before sewing and match their left and right angles.
Issue pp. 69–71
Reindeer coaster

A round crochet base with a red nose and felt antlers. Keep raised details outside the cup footprint and test the empty cup for rocking.
Issue pp. 72–73
Snowman coaster
See the shared project photo
A round base decorated with a felt hat and carrot nose. Arrange the face and hat flat before stitching to the backing.
Issue pp. 72–73
Robin coaster
See the shared project photo
A round base with a contrasting breast and wing. Pin the small felt pieces first and keep seam bulk low.
Issue pp. 72–73
Santa coaster
See the shared project photo
A round face with a felt beard and festive cap. Check that the cup sits flat after the beard and cap are attached.
Issue pp. 72–73
Dog paw stocking

A stocking with red paw pads and a bone detail. Lay out the toe pads before sewing. Hang the finished stocking out of reach.
Issue pp. 74–75
Polar bear with hat and scarf

A stuffed bear with matching winter accessories. Check the head and leg balance before adding the separate clothing.
Issue pp. 76–79
Peas in a pod

Three round amigurumi peas sit in separate shells within a pod. Fit the shells and peas together before assembling the pod.
Issue pp. 80–82
Shell stitch shawl

A red openwork shawl with a shell border. Swatch a full shell repeat and check drape after blocking.
Issue pp. 83–84
4. Tree and mantel
Choose a look first. The Nordic cones and star frames use restrained shapes, while the bauble wreath, jar toppers and gnomes suit a brighter display.
Large cone tree

A tall standalone cone with a separate circular base. Fit the cone opening to its base and test that the filled tree stands.
Issue pp. 55, 61
Medium ridged cone tree
See the shared project photo
A shorter cone with a ridged surface. Work a ridge sample and compare the opening with the base before sewing.
Issue pp. 55, 61
Small plain cone tree
See the shared project photo
A plain small cone for a grouped display. Pin the cone to its base and check that the point sits upright.
Issue pp. 55, 61
Holly star wreath

A star frame trimmed with holly leaves and berries. Test the leaf layout around the star before adding berries.
Issue pp. 59, 64–65
Mistletoe star wreath
See the shared project photo
A star frame with long and short mistletoe sprigs. Arrange the two stem lengths on the frame before fastening.
Issue pp. 59, 64–65
Bobble star wreath
See the shared project photo
A star frame finished with bobbles and ribbon details. Space the bobbles first so the star points remain visible.
Issue pp. 59, 64–65
Christmas tree advent wall hanging

A backdrop with a tree, separate ornaments and an optional advent use. Lay out the tree and ornaments on the backdrop before sewing the rod pocket and attaching the pieces.
Issue pp. 87–89
Bauble and star wreath

A wreath covered with spiral baubles, stars and round baubles. Make one of each component and plan the arrangement around the frame.
Issue pp. 90, 94–95
Santa snow globe

A miniature Santa and gifts on a fitted base inside a globe. Check the size of the scene against the globe opening before assembly.
Issue pp. 91, 95–96
Chimney stocking

A stocking with snow trim, elf legs and optional tree and gift appliqués. Position the elf legs and chosen appliqués before stitching them to the stocking.
Issue pp. 92, 96–97
Santa jar topper

A reusable lid cover finished with a Santa head and hat. Fit the topper base to the jar before adding the head.
Issue pp. 93, 97–98
Snowman jar topper
See the shared project photo
A lid cover with a snowman face and separate nose. Test the lid fit and centre the nose before sewing.
Issue pp. 93, 97–99
Elf jar topper
See the shared project photo
A lid cover with striped hat and pointed ears. Make the two ears as a pair and fit them around the hat band.
Issue pp. 93, 97–99
Penguin jar topper
See the shared project photo
A lid cover with pale eye patches and a beak. Pin the eye patches together so the finished face sits evenly.
Issue pp. 93, 97–99
Carousel bauble

A colourful striped cover for a round ornament form. Test the cover against the actual ornament form before closing it.
Issue pp. 99–100
Granny bauble

Two small granny-style panels joined around a ball. Check that both panels match and cover the form before joining.
Issue pp. 100
Treat cups
See the shared project photo
Small festive crochet cups for presentation. Test that the empty cup sits flat before adding wrapped treats.
Issue pp. 100
Star bunting

A strand assembled from small crochet stars. Block each star and measure the spaces before joining them to the strand.
Issue pp. 100–101
Peg angels

A wooden peg dressed with a crochet gown, halo and wings. Fit the gown around the peg first, then position the halo and wings.
Issue pp. 101
Ripple garland

A narrow red, white and green garland with a rippled outline. Work a short repeat to check how the ripple hangs before choosing length.
Issue pp. 103
Heart tree skirt

A star-point tree skirt with separate heart appliqués. Measure the tree stand and lay out all points and hearts before joining.
Issue pp. 104–106
Reindeer intarsia hanging

A charted reindeer portrait worked from the bottom up. Prepare small colour bundles and check the chart direction before the first change.
Issue pp. 107–108 · chart p. 121
Filet shelf trim

A red openwork shelf edging built from blocks and spaces. Measure the shelf and sample a chart repeat before calculating the full length.
Issue pp. 109–110 · chart p. 121
Popcorn stocking

A colourful stocking with textured popcorns and pompoms. Check the colour sequence and compare the leg and foot measurements.
Issue pp. 111–113
Christmas tree gnome

A shared gnome body with tree-themed hat trim and a star. Pin the star at the tip and check that the hat remains balanced.
Issue pp. 114–116
Santa gnome
See the shared project photo
A shared gnome body with Santa hat trim and belt detail. Mark the belt and trim positions before sewing.
Issue pp. 114–116
Snowman gnome
See the shared project photo
A shared gnome body with holly, a hat stripe and a scarf. Fit the scarf around the body and secure the holly and berry.
Issue pp. 114–116
Snowflake gnome
See the shared project photo
A shared gnome body with snowflake decoration and a tassel. Place the snowflake before attaching the tassel so the hat hangs evenly.
Issue pp. 114–116
Gingerbread gnome
A shared gnome body with icing-style trim and buttons. Space the icing and buttons along the hat before fastening.
Issue pp. 114–116
5. PetsCrochet picks
The three animal baubles make the pet connection without needing a wearable costume. Pair them with the dog paw stocking in the gift section.
Shih Tzu bauble

A fuzzy dog ornament with a short muzzle and Santa hat. Place the muzzle and ears before adding decorative yarn. Display out of pets’ reach.
Issue pp. 117–119
Poodle bauble

A pink dog ornament with textured ears and a bow. Check that both ears hang at the same height before fixing the bow.
Issue pp. 117–120
Calico cat bauble

A patched cat ornament with pointed ears and a festive hat. Baste the colour patches and ears before deciding where the hat sits.
Issue pp. 117, 120
Keep the sets and extras together
- Advent tree. The tree, star and separate mini stockings and mittens are parts of the wall hanging. See pp. 87–89.
- Bauble wreath. Spiral baubles, stars and round baubles are construction pieces for the wreath. See pp. 94–95.
- Snow globe. Santa, gifts and the fitted scene base go together. See pp. 95–96.
- Chimney stocking. Elf legs, shoes, trees and small and large gifts are the trim and optional appliqués. See pp. 96–97.
- Pet baubles. The Shih Tzu uses a Santa hat, the poodle uses bows and collar, and the cat has a party hat. See pp. 118–120.
- Nativity inspiration. The Ricorumi Christmas crib on p. 102 appears in an advert. Look for its separate kit or official pattern if you want to make the scene.
Find your charts and stitch terms
The issue uses UK terms. UK dc is US sc, UK htr is US hdc, UK tr is US dc, and UK dtr is US tr. Check the original chart legend for special stitches. The charts are on pp. 121–124 and the stitch guide is on pp. 125–130. Find the full published instructions in the digital issue. Your Crochet Christmas 2024 digital edition